Circular saws blades with HM flat and trapezoidical tooth for cutting tubes in aluminium and light alloys.

Made in high speed steel HSS DMo5 (M2; Werkstoff Nr. 1.3343) specified for cutting off aluminium and of the and light alloys thanks to the hardness lowered to 60-62 HRC and to a tooth of bend form with increased drain, that makes it easier the penetration work process and avoid blemish.

Circular saw blades high speed steel HSS Dmo% (M2; Werkstoff Nr.1.3343) for cutting off brass and bronze. Our standard products line offers neutral blades, made with bore and grind starting from a diameter of 150 mm up to a diameter 250 mm, with thickness of 1,2 mm and 1,5 mm and toothing B (DIN 1838). On request we can supply blades with VAPO treatment Anti seizing and surface treatment TiN, TiCN, TiALN.

This tool is able to exalt at ots best the capability of Your tool machines. The special rest paired to the HSS COBALT 42 tooth grants a lot of fast, perfectly straight cuttings. On demand available with constant toothing.

The standard production supplies hole saw starting from a diameter 10 mm up to a diameter 105 mm, built with Super Rapid Steel Dmo5, with lateral toothing waste that allows the expulsion of the shaving.

The standard production supplies hole saw from a diameter of 10 mm up to a diameter of 150 made of Super Rapid Steel Dmo5.

Circular saw blades steel alloy 80CRV2, that cut by fusion mild steel and iron pipes and profiled. The execution is characterised of a temper integral process that makes it possible to reach a standard hardness of 40-45 HRC. Moreover of the standard products our technical office is available for the customer in order to consider specified requirements and to optimise the use of the blades and of the working process to carry out.

High speed steel circular saw blades HSS Dmo5 (M2; Werckstoff Nr. 1.3343) suitable for cutting off bolts and screw plants. Our standard products line offers neutral blades flat (without hub) starting from a diameter of 80 mm up to a diameter 125, with thickness from a minimum of 0,7 mm up to a maximum of 2 mm with tooth form A.

Circular saw blades high speed steel composed by 5% of Molybdenum particularly suited for cutting metals and alloy steel. According to special request of the customers and in order to optimise the use of the blades and the working process we can supply blades with toothing form “AW” (DIN 1837 with teeth bevelled alternatively) or form BW (DIN 1838 with teeth bevelled alternatively) and with VAPO treatment Anti seizing with special surface treatment TiN, TiCN, TiALN.

Circular saw blades high speed steel composed by 5% of Molybdenum suitable for cutting off metals and alloy steel. These circular saw blades are used for manual cutting machines, semi-automatic machines and automatic ones.  On request of the customer we are able to supply blades with toothing “BS” form (with chipbreaker) and with VAPO treatment Anti seizing with the special surface treatments TiN, TiCN, TiALN.