The Shark 332 NC 5.0 is a eletrohydraulic automatic bandsaw machine with multimicroprocessor which can operate in automatic, semi-automatic, semi-automatic/dynamic and manual mode. In automatic cycle (0-60° left), semi-automatic, semi-automatic/dynamic and manual cycle (0-45° right and (0-60° left). Featuring a capacity of 330mm x 260mm.
The Shark 332 NC 5.0 is a eletrohydraulic automatic bandsaw machine with multimicroprocessor which can operate in automatic semi-automatic, semi-automatic/dynamic and manual mode. In automatic cycle (0-60° left), semi-automatic, semi-automatic/dynamic and manual cycle (0-45° right and (0-60° left). Featuring a capacity of 330mm x 260mm.
CNC Machine with a new controller: BAHCO 50 with Windows “CE” based. The MEP 50 has been designed by MEP.
7” Touch screen display operator interface and push buttons for all functions of the sawing machine. It is simple and intuitive, it guarantees a reliable use and it controls all cutting parameters in real time
Console installed on articulated arm
Alarm memory display
Electronic inverter for the continuous adjustment of the blade speed from 15 to 100m/min
Self-contained hydraulic control unit, with high efficiency and low energy consumption
Feed vice with recirculating ball screw and stepper motor feed
600mm stroke length
Cutting head and feeding vice positioning with joystick
Automatic acquisition of the actual starting point of the cut
Blade tensioning by electronic transducer with display
Auto downfeed control with adoptive servovalve
Two electric pumps for maximum coolant flow
Swarf brush driven by blade Tool Kit, Instruction manual and spare parts list also supplied.
We also supply BAHCO BANDSAW BLADES and COOLANT for this machine.
Vice pressure regulator
Digital angle display: Laser projector and work light
Supplementary foot pedal with emergency stop
Spray mist system
Motorized chip conveyor
Hydraulic vertical vices for bundle cutting
Special vice to reduce restpiece
1.5m K110 roller table sections
For infeed and outfeed
R1, R2 and R3 Measuring system with flip over stop
Cutting Capacity (mm)
330mm x 260mm
270mm x 200mm
170mm x 170mm
200mm x 160mm
Electric Motor Three Phase
3320mm x 27 x 0.9
Blade Speed – Three Phase
2720mm X 2320mm
PRODUCTS YOU MAY ALSO LIKE
About ads Precision
We at ADS Precision Ltd are the metal Cutting Specialists. Our directors and engineers have many years experience in metal cutting and engineering cutting processors.
Our aim is to give you the customer the correct advice for your individual cutting application.