Bandsaw & Cutting Tool Specialists
0114 2347352

MEBA SWING 260 GA Automatic Mitre Bandsaw

  • Technical Data
  • Standard Features
  • Product Options

[ws_table id=”128″]


  • Compact design
  • Two way mitring up to 30° left and right
  • Fast adjustment of mitre by scale
  • The swivel is directly above the intersection of the saw blade and the fix vice jaw so that there is a datum measuring point which does not change with the mitre angle
  • Manual material clamping. Material is always clamped at 90° regardless of the angle to be cut
  • Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cyclinder
  • Integrated chip collection tray
  • Saw blade drive stops after the finished cut
  • High precision carbide roller guides


Additional standard equipment for MEBA Swing 230 G/ 230 DG


  • Measuring device with scale up to 500mm
  • Complete coolant system with immersed pump can be combined with micro coolant system

Additional standard equipment 260 DG


  • MEBA micro-coolant system (without flood cooling)
  • Rapid lowering of the saw frame via a button into the cut


Additional standard equipment 260 DH-HS


  • MEBA micro coolant system (without floor cooling)
  • Semi Automatic sawing cycle
  • Hydraulic material clamping
  • Hydraulic lifting of saw frame
  • Rapid lowering of the saw frame via a button into the cut
  • Saw frame lifts to just above the material after the cut is finished


Additional standard equipment 260 GA


  • Hydraulic material clamping


Please contact us.