full
border
#666666
http://www.adsprecision.com/wp-content/themes/smartbox-installable/
http://www.adsprecision.com/
#1F559F
style4
Bandsaw & Cutting Tool Specialists
0114 2347352

MEBA SWING 405 DG Semi Automatic Double Mitre Bandsaw


Tabs
  • Technical Data
  • Standard Features
  • Product Options

MEBA SWING 405 DG
30° Left -
45° Left Ø300 300x300
90° Ø410 620x410
45° Right Ø360 420x360
30° RightØ300 300x300
Motor 3.0 Kw AC
Blade Size 5000x34x1.1mm
Saw Blade Speed 15-150 m/min
Length of Remaining Piece without Bundle Clamp Manual: 105mm; Automatic: -
Length of Remaining Piece with Bundle Clamp Manual: 260mm Automatic: -
Maximum material size with bundle clamp Ø320 320x400mm
Shortest Ø5mm
Dimension 1450x2450x1420mm
Working Height 750mm
Weight 1200Kg

 

  • Fast adjustment of mitre by scale
  • The swivel is directly above the intersection of the saw blade and the fix vice jaw so that there is a datum measuring point which does not change with the mitre angle
  • Manual material clamping. Material is always clamped at 90° regardless of the angle to be cut
  • Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cylinder
  • Integrated chip collection tray
  • Saw blade drive stops after the finished cut
  • High precision carbide roller guides

Additional standard equipment for MEBA Swing 320 G -HSS

  • MEBA power package “HSS” – Hydraulic Lifting (H) and lowering (S) of the saw frame. Hydraulic clamping (S) of the material.
  • Powerful frequency controlled saw blade drive


Additional standard equipment MEBA Swing 320 DG, 405 DG

  • Unique, patented double mitre system: Rotating table avoids sawing up of the material support. Material is always clamped rectangular and close to the saw blade
  • MEBA power package “HSS” – Hydraulic Lifting  (H) and lowering (S) of the saw frame. Hydraulic clamping (S) of the material. Including stepless, hydraulic cutting pressure and feed control. Display of lowering speed by scale. Display of cutting pressure by manometer. Rapid lowering of the saw frame by button until end of cut.
  • Free standing control panel (405 DG only)

Additional standard equipment 260 DH-HS

  • MEBA micro coolant system (without floor cooling)
  • Semi Automatic sawing cycle
  • Hydraulic material clamping
  • Hydraulic lifting of saw frame
  • Rapid lowering of the saw frame via a button into the cut
  • Saw frame lifts to just above the material after the cut is finished

Additional standard equipment 260 GA

  • Hydraulic material clamping

 

Please contact us.

PRODUCTS YOU MAY ALSO LIKE