MEBA Base 33 DGA – CNC Bandsaw

Access guarding according to CE standard with safety fence

• Fully automatic sawing sequence with combination of length, number of pieces, miter left+right.
• Visualized program input with CNC control. Simple program creation and management of up
  to 255 programs.
• MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic
  cutting pressure and feed monitoring, i.e. constant pressure for solid material and constant feed
  for thin-walled profiles.
• Fast and precise material length feed via backlash-free ball screw and servo positioning
  technology.
• Electronic swiveling
• Rapid traverse lowering of the saw frame via pushbutton to the material edge
• Unique double miter bandsaw, where miters on both sides can be set simply and economically by
  swiveling the saw frame and the material support
• Automatic movement of the clamping vices and digital miter adjustment to 0.1°
• The mitre pivot point is the intersection between the saw blade and the fixed clamping jaw, so there
  is no change of the length dimension with changing angular position.
• Hydraulic full-stroke workpiece clamping. In any angular position, the material is clamped parallel at
  90°, so there are no force components that press the material at an angle against the fixed
  clamping jaws. against the fixed clamping jaws.
• Stable two-column linear saw frame
• Saw blade inclined 3° to the material support surface
• Saw frame clearance height adjustment automatically via height adjustment bar
• AC frequency-controlled band saw blade drive infinitely variable 15 – 150 m/min
• Minimum speed and saw band breakage monitoring on the band disc
• Movable belt guide arm, adjustment to material width
• Saw band deflection roller carbide guide
• Chip cleaning brush, non-driven
• 1 MEBA bimetal band saw blade 4/6 ZpZ on machine
• CETOP hydraulic system with filter and oil control
• Microdosing system
• Modem for remote access included in the scope of delivery