MEBA Swing 320 G-HSS – Semi-Automatic Bandsaw

The MEBAswing 320 G-HSS is a semi automatic Mitre-cut bandsaw 30°- 90°

Cutting speed can be adjusted steplessly
Hydraulic feed control
Hydraulic lifting and lowering of the saw frame
Hydraulic clamping of material
Powerful, frequency-controlled saw blade drive
Swivelling area 30° r.h
Cutting pressure- and feed control is steppless and hydraulic
Hydraulic material full-stroke clamping
Fast adjustment of mitre by scale
The swivel is directly above the intersection of the saw blade and the fix vice jaw so that there is a datum measuring point which does no change with
the mitre angle
Manual material clamping. Material is always clamped at 90° regardless of the angle to be cut
Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cylinder
Integrated chip collection tray
Saw blade drive stops after ended cut
Precise saw blade carbide roller guidance

Cutting Capacity	mm
90°	Ø 325 500 x 300 mm
45° rh	Ø 300 300 x 300 mm
30° rh	Ø 200 200 x 200 mm
Motor	3 kW AC
Saw blade	4200 x 34×1,1 mm
saw blade speed	15–150 m/min
length of remaining piece without bundle clamp	manual: 60 mm automatic: –
length of remaining piece with bundle clamp	manual: 165 mm automatic: –
max. material size with bundle clamp	Ø 325 500 x 300 mm
shortest Ø	5 mm
dimensions (L xWxH)	1300 x 2050 x 1400 mm
working height	750 mm
weight	910 kg

If you need further assistance, please don’t hesitate to give us a call or reach out to us directly.

Customer Support

0114 234 7352

Need More Information? Get In Touch

Bandsaw Machines