MEP Shark 330 NC 5.0 – Automatic CNC Bandsaw Machine

The MEP Shark 330 NC 5.0 is a eletrohydraulic automatic bandsaw machine which can also operate in semi-automatic cycle to cut at 0° with rest piece which cannot be fed in automatic of 85mm.

The MEP Shark 330 NC 5.0 is a eletrohydraulic automatic bandsaw machine which can also operate in semi-automatic cycle to cut at 0° with rest piece which cannot be fed in automatic of 85mm. Featuring a capacity of 330mm x 250mm.

• CNC Machine with a new controller: MEP 50 with Windows “CE” based. The MEP 50 has been designed by MEP.
• 7” Touch screen display operator interface and push buttons for all functions of the sawing machine. It is simple and intuitive, it guarantees a reliable use and it controls all cutting parameters in real time
• Console installed on articulated arm
• Alarm memory display
• Electronic inverter for the continuous adjustment of the blade speed from 15 to 100m/min
• Self-contained hydraulic control unit, with high efficiency and low energy consumption
• Feed vice with recirculating ball screw and stepper motor feed – 600mm stroke length
• Cutting head and feeding vice positioning with joystick
• Automatic acquisition of the actual starting point of the cut
• Blade tensioning by electronic transducer with display Auto downfeed control with adoptive servovalve Two electric pumps for maximum coolant flow
• Swarf brush driven by blade -Adjustable rollers for bundle cuttihng on one row – Adjustable guide to unload cut pieces