MEP Tiger 402 CNC HR 4.0 – Automatic Circular Saw

– 8” touch screen display operator interface and push buttons for all functions of the sawing machine. It is simple and intuitive with a self-learning feature, it guarantees a reliable use and it controls all cutting parameters in real time.

– Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.

– The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel.

– Sawing head movement on double linear guide with preloaded slides with recirculating ballscrews.

– The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel.

– Head down stroke by means of pneumatic cylinder with coaxial hydraulic brake to obtain the maximum cutting rigidity.

– Shearing stress control.

– Transmission system with serrated  pulleys and belts.

– Blade rotation with 2-speed motor at 1400/2800 rpm.

– Automatic device to lubricate the blade only when the machine is cutting.

– Rotation pin with thrust bearing to grant rotation precision and stability.

– Bar feeder has a length of 1000 mm and consists in a system given by screw/nut with recirculating ballscrews with stepper motor and vice with sideways movement so as to feed in also deformed bars.

– Chip conveyor predisposed to mount optional chip collector.

– Pneumatic double locking vice.

– Pneumatic vertical vice.

– Indicator with flashing light in case cycle is stopped.

– Control and function system protected against in-going and/or out-going electrical and electromechanical phenomenon.

– Machine arranged for handling with movement equipment.

– Circular blade Ø 400 mm.

– Service keys and instructions manual for maintenance and spare parts list.