MEBA SWING 260DG Double Mitre Manual Bandsaw

• Fast adjustment of mitre by scale
• The swivel is directly above the intersection of the saw blade and the fix vice jaw so that there is a datum measuring point which does not change with the mitre angle
• Manual material clamping. Material is always clamped at 90° regardless of the angle to be cut
• Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cyclinder
• Integrated chip collection tray
• Saw blade drive stops after the finished cut
• High precision carbide roller guides

Additional standard equipment for MEBA Swing 230 G/ 230 DG

• Measuring device with scale up to 500mm
• Complete coolant system with immersed pump can be combined with micro coolant system

Additional standard equipment 260 DG

• MEBA micro-coolant system (without flood cooling)
• Rapid lowering of the saw frame via a button into the cut

Additional standard equipment 260 DG-HS

• MEBA micro coolant system (without floor cooling)
• Semi Automatic sawing cycle
• Hydraulic material clamping
• Hydraulic lifting of saw frame
• Rapid lowering of the saw frame via a button into the cut
• Saw frame lifts to just above the material after the cut is finished

Additional standard equipment 260 GA

• Hydraulic material clamping

Please contact us.

• 30° L

• Ø 130 mm 

  120 x 120 mm

• 45° L

• Ø 200 mm

  180 x 180 mm

• 90 °

• Ø 260 mm

  300 x 260 mm

• 45° R

• Ø 200 mm

  180 x 180 mm

• 30 ° R

• Ø 130 mm

  120 x 120 mm

• Motor

• 1,1/1,9 KW

• Saw blade

• 3350 x 27 x 0,9

• Cutting speed

• 35/75 min

• Dimensions

• 800 x 1720 x 1450 mm

• Weight

• 710 kg