Industrial Saw Specialists
+44 (0)114 234 7352 [email protected]
Contact Us

MEP SHARK 332-1 SXI Evo Semi Automatic Bandsaw

Product Information

The SHARK 332-1 SXI EVO is a electrohydraulic semi-automatic band sawing machine to cut metals mitering from -45° to +60°.

Capacity: 330 x 250
Download Product PDF Contact Us
Standard Features
  • Console with all centralized controls, installed on
    an articulated arm.
  •  Low voltage soft keyboard, in polyester, with thermo-shaped buttons, with tactile feeling and sound signal when operating.
  • Display for the following messages: Diagnostic +Allarms (cause description). + Input and output status. + Cut counting. + Time spent for the cut made. + Blade motor absorption. + Blade tension. + Blade speed. + Numeric displaying of the head position.
  • Control handle of the manual cycle at 24 V, IP55.
  • Program with several special cutting cycles.
  • Latest generation hydraulic control unit, with high efficiency and low energy consumption.
  • Rotating table (mounted on a 420 mm roller bearing, pre-loaded with thrust bearing) with
    steel vice plates which can be replaced after wear.
  • Double band rotation speed (40/80 m/min) with card PRESET to mount the electronic inverter for the continuous adjustment of the band speed (from 15 to 100 m/min).
  • The limits of the head stroke are programmed through the control board, depending on the
    dimensions of the bars to be cut.
  • Sliding vice with sideways movement and fast positioning system which functions in automatic also when in manual mode.
  • Manually-operated blade tensioning through electronic transducer, with displaying.
  • Steel base allows to recover coolant also when cutting at the maximum degrees.
  • Coolant tank inside the steel base with electric pump so as to lube-refrigerate band. The drawer to collect chips can be replaced with a motorized
    chip evacuator (see optionals).
  • Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard delivered traditional lubrication with emulsible oil.
  • Wire chip brush for band cleaning.
  • Machine arranged for handling with movement
    equipment.
TECHNICAL DATA

  • Cutting Capacity (mm)

  • Round

  • Square

  • Rectangle

  • 0°

  • 300 mm

  • 260 mm

  • 330 x 250 mm

  • 45° right

  • 260 mm

  • 250 mm

  • 260 x 200 mm

  • 60 ° left

  • 180 mm

  • 170 mm

  • 170 x 170 mm

  • 45° right

  • 240 mm

  • 210 mm

  • 240 x 160 mm

  • TECHNICAL DATA

  • Electric Motor Three Phase

  • 1,5/1,8 Kw

  • Blade Size

  • 3650 x 27 x 0,9

  • Weight

  • 675 Kg

  • Max Open Vice 

  • 335 mm

Similar Products

-
Eberle Logo
LENOX BANDSAW LOGO
MEBA SAW LOGO
Proslice Logo
Loading...