MEP SHARK 382-1 SXI EVO Semi Automatic Bandsaw

Product Information

SHARK 382-1 SXI EVO, electrohydraulic semi-automatic band sawing machine to cut metals mitering from -45° to +60°. In addition to the semi-automatic cycle, it can also operate in manual and semi-automatic/dynamic modes.

Capacity: 380 x 250 mm

Download Product PDF Contact Us

Standard Features

Console with all centralized controls, installed on an articulated arm.
Low voltage soft keyboard, in polyester, with thermo-shaped buttons, with tactile feeling and sound signal when operating.
Display for the following messages: Diagnostic + Allarms (cause description). + Input and output status. + Cut counting. + Time spent for the cut made. + Blade motor absorption. + Blade tension. + Blade speed. + Numeric displaying of the head position.
Control handle of the manual cycle at 24 V, IP55.
Program with several special cutting cycles.
Latest generation hydraulic control unit, with high efficiency and low energy consumption.
Rotating table (mounted on a 420 mm roller bearing, pre-loaded with thrust bearing) with steel vice plates which can be replaced after wear.- Double band rotation speed (40/80 m/min) with card PRESET to mount the electronic inverter for the continuous adjustment of the band speed (from 15 to 100 m/min).
The limits of the head stroke are programmed through the control board, depending on the dimensions of the bars to be cut.
Sliding vice with sideways movement and fast-positioning system which functions in automatic also when in manual mode.
Manually-operated blade tensioning through electronic transducer, with displaying.
Steel base allows to recover coolant also when cutting at the maximum degrees.
Coolant tank inside the steel base with electric pump so as to lube-refrigerate band. The drawer to collect chips can be replaced with a motorized chip evacuator (see optionals).
Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard-delivered traditional lubrication with emulsible oil.
Wire chip brush for band cleaning.
Machine arranged for handling with movement equipment.
Adjustable rod to measure stop to make cuts of the same length with millimetred steel rod.
Stock support arm with roller predisposed to mount loading table.
Bi-metal band for solids and sections.
Service keys and instructions manual for maintenance and spare parts list.